An oil an gas service in Qatar; 10 positions; 2 of 4 ads ~ Oilfield Recruitment

Posting date: January 23, 2016
Expiry date: February 06, 2016

An oil an gas service in Qatar seeking the right candidates for the following positions:

11. GAS CYCLINDER MAINTENANCE SUPERVISOR

Job Descriptions :
• Gas Cylinder Maintenance Supervisor shall be a capable person well versed in all aspects of Pressurized cylinders and international regulations for pressurized cylinders handling and storage. Should be well experienced in efficient dismantling, re installation & transportation techniques of the different types of pressurized cylinders in complex Installation in LNG Plant or Petrochemical Plant. Hands on work experience are essential.
o He shall be capable for safe handling of pressurized gases like Nitrogen, Carbon Dioxide, Helium, Oxygen, Argon, Inergen gas, Calibration gases etc. (Not limited to these gases only, may vary).
o He should be familiar with different type of cylinder connections, cylinder valves, standards and should be capable of safe handling of hazardous gases in the pressurized cylinder.
• He should also have adequate maintenance Gas Cylinder handling experience and knowledge of Inventory Management in Large gas /petrochemical Process Plants.
o He shall liaise with Plant Operations, Inspection Division for Gas Cylinder inspection.
• He shall co-ordinate with external gas cylinder maintenance Contractors.
• He shall be well versed on Safety requirements.
• He shall be able to prepare reports and maintain up to date status.

MINIMUM REQUIREMENTS:
1. Diploma in Mechanical / Instrumentation Engineering
2. Adequate knowledge of different types of pressurized cylinders in complex installations.
3. Work experience with specialization in Gas cylinders/ F & G System
4. Minimum 8 to 10 years relevant experience overall of which at least 5 to 6 years must be in LNG/Petrochemical Plants.
5. Supervisory experience essential, minimum five years.
6. Computer literate; shall be able to perform MS Office and basic computer applications.
7. Qatari Driving License.
8. Proficient in English - both spoken and written
9. Good health

12. GAS CYLINDER MAINTENANCE TECHNICIAN

Job Descriptions :
• Technician must be highly skilled, efficient in dismantling, re installation & transportation techniques of the different types of pressurized cylinders in complex Installation in LNG Plant or Petrochemical Plant.
• He should capable to safe handling of pressurized gases like Nitrogen, Carbon Dioxide, Helium, Oxygen, Argon, Inergen gas, Calibration gases etc. ( Not limited to these gaseous only, may vary).
• He should have hands on experience in removal and re installation of cylinders and should be well versed with different cylinder connections standards.
• He should be well versed on Safety requirements.

MINIMUM REQUIREMENTS:
1. Schooling up to Secondary School Certificate or Equivalent
2. Trade Certificates in Mechanical Fitter / Instrumentation.
3. Minimum 8 years of experience of which 4 to 5 years must be in LNG/Petrochemical Plants.
4. Well versed in Maintenance of gas cylinders and Fire and Gas Systems.
5. Proficient in English - both spoken and written
6. Good health

13. MECHANICAL VALVE TECHNICIAN (PSV/PRV)

Job Descriptions :
• Carries out the skilled maintenance, overhaul and repair of all types of valve, exchangers, Pressure testing of equipment in their respective assigned areas. Includes disassembly, repair, service and re-assemble of valves equipment as well as implementation of modifications.
• Carries out the skilled maintenance on such items of Plant and equipment as Ball Valve, Gate Valve, Globe Valve, Butterfly Valve, Plug Valve, Safety Relief Valve’s, Pilot operated Valve’s, Vacuum Valve’s, Pressure testing etc.
• Uses a variety of tools and measuring devices, such as hammers, wrenches, pneumatic tools, high pressure jetting and drilling equipment, grinders, calipers, feeler gauges, micrometers, Vernier’s, dial indicators, etc. In accordance with permit to work system. Ensures that tools used are correctly calibrated. Must be able to work to very close tolerance.
• Ensures that materials and spare parts are available and in good condition before starting maintenance activity.
• Carries out complete maintenance and servicing of PRV & ISOLATION Valves, according to schedules. This includes Lapping Technique, testing methods as per API standards, general overhaul of test equipment. Repairs and or replaces defective parts, reassembles overhauls equipment.
• Carries out wide range of corrective maintenance and repairs as a result of checks or failures of equipment. This includes the dismantling of various static and rotating equipment; repair the equipment reassembly and the re-commissioning.

MINIMUM REQUIREMENTS
1. Completed Secondary (12 years) Education followed by 2 years formal courses in mechanical crafts.
2. Minimum of 4 years of Valve Technician and maintenance experience in an oil or gas process plant / Petro Chemical Industries.
3. Fair working knowledge of English.

14. MECHANICAL ASSISTANT

Job Descriptions :
• Assists Senior Mechanical Technician/ Contract Mechanical Technician in overhaul and repair of Plant and equipment in their respective assigned areas.
• Assist Senior Mechanical Technician and Mechanical Technician on such items
• of Plant and equipment as gas turbines, compressors, alternators, steam turbines, pumps, fans, boilers, vessels, columns, heat exchangers, LNG storage tanks, loading arms, flares, filters, valves, etc.
• Assists Senior Mechanical Technician and Mechanical Technician in use of
• variety of tools and devices, such as hammers, wrenches, pneumatic tools, high- pressure jetting and drilling equipment, grinders, calipers, etc.
• Assist Senior Mechanical Technician and Mechanical Technician in carrying out routine maintenance of machinery and static equipment according to schedules, check lists and specific equipment requirements. This includes changing oils, cleaning strainers, replacing filters, greasing and general overhaul of equipment.
• Assists Senior Mechanical Technician and Mechanical Technician in carrying out a wide range of equipment, this includes dismantling of various static and rotating equipment, the repair, the equipment reassembly and the decommissioning.

MINIMUM REQUIREMENTS
1. Completed Secondary (12 years) Education.
2. Minimum of 4 years of mechanical crafts and maintenance experience in an oil or gas process plant / Petro Chemical Industries.
3. Fair working knowledge of English.

15. TOOL ROOM ASSISTANT

Job Descriptions :
• Directs tool and equipment issue, assists in physical inventory of all equipment, tools. Maintains equipment through routine maintenance orders and receives equipment and supplies.
• The Tool Room Technician works at COMP NY’s Central Tool Room. Work contracts include COMPANY’s direct hire technicians, contracted Technicians, and all Technical and nontechnical staffs of COMPANY and also industry vendors.
• Receive instructions and general direction regarding routine and standard matters, specific instructions regarding special equipment/supplies and non-routine matters from Mechanical Workshop Foreman.
• Conducts quarterly and annual equipment and facility safety inspections, and ensures all precision measurement equipment is properly calibrated.
• Inform required purchase requirements for the tools;
• Ensure all equipment is in proper operating condition;
• Maintains tool and equipment security;
• Issues tools and equipment to Technicians and other authorized persons with proper documentation;
• Receives equipment noting any shortages or overages;
• Inspect for damage received in transit; • Assigns inventory control numbers, and places equipment in designated areas;
• Assists in conducting periodic inventories of all tools including capital equipment items; inputs data and maintains inventory control file on items.
• Requests, receives and monitors the use of consumable supplies;
• Performs preventive maintenance on CTR tools;
• Assists in setting up for special events;
• Performs related duties as assigned.

MINIMUM REQUIREMENTS :
• Knowledge of tool room operation, property control, Issuing and receiving procedure; computerized inventory systems;
• Awareness of safety related issues.
• Ability to work independently while recognizing situations that require the supervisor’s attention;
• Communicate effectively and establish cooperative working relationships with persons contacted in the course of performing assigned duties.
- A valid Driver’s License shall be an added advantage

16. JOB DESCRIPTION FOR FABRICATOR

Job Descriptions :
• Studying structural and piping related drawings, takes required measurements at site, Prefabricates structural steel and piping of Carbon Steel, Stainless Steel etc. Shall be able to do grinding, drilling oxy acetylene, gas cutting and plasma cutting, marking as per drawing, tack welding. Also capable of identifying correct material of each job as per drawing.
• Receives instructions from the Fabrication shop Foreman and arranges material, take measurement to fabricate the item as per the drawing or instructions.
• Collects the material and consumables from warehouse as required for the fabrication of structural steel or piping.
• Fabricate Structural Steel items as per the drawings/ sample/ taking measurements from the site.
• Capable of carrying out gas cutting, grinding, tack welding drilling etc.
• Shall be able to read isometric drawings and make the piping accordingly. In the process of piping, shall be capable of pipe bending, mitering, cutting, piping layout, edge preparation, alignment of piping, fitment etc.
• Shall be able to carry out all the fabrication activities with minimum possible wastage and proper utilization of material.
• Shall be able to understand different standards of piping and recognizing the different piping components.

MINIMUM REQUIREMENTS:
1. Completion of Higher secondary education or equivalent, along with a trade certificate.
2. Must be highly skilled with minimum 3 to 5 years of experience in Fabrication of structural steel and piping.
3. Good health.
4. Safety oriented.
5. Good Knowledge of both written and spoken English

17. WELDER

Job Descriptions:
• Carries out a variety of high pressure and general welding work mainly in the fabrications workshop and on site using electric arc, oxygen and acetylene equipment, and metal inert gas or tungsten inert gas.
• Receives verbal instructions, work orders sketches and drawings from workshop foreman and arranges for necessary equipment, tools and materials. Consumables, materials and any special tools to carry out the work. Ensures welding work permits are available prior to starting a job.
• Reads drawings, sketches or symbols, marks or makes free-hand layout on metal and prepares metal surface for welding. Selects the correct type and gauge welding rods for specific welds in specific types of materials, such as carbon steel, ferritic, austenite and stainless steel.
• Operates electric and welding machines, and adjusts ampere and voltage during welding. Operates oxygen/acetylene welding equipment, connects regulators, torch and gas cylinders, adjusts gas pressure.
• Welds, cuts and brazes metal and metal parts. Works with ferrous and non- ferrous metals, such as brass, bronze, cast iron, stainless steel and aluminum. Performs flat, vertical and overhead welding, as well as pipeline welding for gas, oil, steam and water lines.
• Operates metal inert gas or tungsten inert gas welding equipment and weld materials, such as heat resistant steel and copper-nickel alloys.
• Uses disc grinders to back-cut welds and drying oven for electrodes, and applies pre and post heat treatment techniques. Also applies correct tacking sequence of large diameter welds to prevent distortion.
• Maintains good housekeeping at all work locations and ensuring compliance with Safety and Fire regulations by wearing protective clothing, footwear, masks, goggles, and gloves and obtaining appropriate work permits before commencing field work.
• Responsible for the support of Company Safety, environment and Quality policies and programs, and carrying out specific duties and responsibilities related to his job as spelled out in Management system documentation, policies, procedures, local documentation, management System Manual, Safety Manual and other related documents.

18. TECHNICAL CONTRACT ASSISTANT

Job Description:
• Assists the Contract Administrator to prepare Tender/Contract Scope of Work and prepare, develop Contract Work Orders and service type Purchase Orders for Plant activities.
• Assist in the administration of all existing and newly awarded Contracts, Contract
• Work orders and Purchase Orders of Maintenance Department.
• Assist in the preparation of Shutdown Tender Scope of Work and subsequent administration of shutdown contract and other related shutdown activities.
• Assist the Contract Administrator to develop accurate estimates at the time of budget preparation, checks invoices accurately for payment and review cost reports.
• Assists the Contract Administrator in defining accurately and technically the user’s requirements and converting them into Contract Work Order (CWO) Scope of Work (with input whenever required from end-users). For small scale jobs, prepare the entire CWO Scope of Work and document it for comment/endorsement by Contract Administrator, Head of Planning & Methods and Maintenance Manager.
• Assists the Contractor Administrator in preparing Contracts/Contract Work Orders, Tender Bids, evaluation documents (with inputs whenever required from end-users) for review/endorsement by requestor, hierarchy, STC or LTC.
• Arranges Contractor Site Visits (faxes, site passes, on-site transportation and meals, etc. whenever required).
• Arrange Contracted persons mobilization and assist in conducting interview, bringing in replacement candidates, preparing gate passes, safety induction trainings, etc.
• Follow-up and coordinate with the contractor and the end users with the mobilization of Contractor manpower and related other activities.
• Involved in a variety of activities such as preparing official correspondence, mobilization of manpower, plant & equipment, mobilizing vendor engineers/supervisors and other relevant requirement during planned and un- planned shutdowns (turnarounds).
• Keeps the Contractor mobilization status report up-to-date on a monthly basis.
• Keeps up-to-date record of Shutdown Contractor manpower, plant and equipment mobilization and other records related to shutdowns (turnarounds).
• Assists the Contract Administrator to develop accurate estimates for contracts, contract work orders, purchase orders, etc. at the time of budget preparation for new financial year.
• Assists the Contract Administrator in reviewing the contracted personnel timesheets and invoices and highlighting errors.
• Assists the Contract Administrator in ensuring the correct charging on requisitions and in SAP of expenditures to the right cost centre, authorization for expenditure (AFE), cost element (GL account) after having checked that funds are available in the relevant budget item.
• Check and verify Contractor man-hour inputs into the system, transfer Contractor hours to create Service Entries in SAP for values up to the approved timesheets.
• Undertakes other similar and related TASKS AND DUTIES as directed by Contract Administrator.
• Responsible for support of COMPANY Safety, Environment and Quality polices programs and carrying out specific duties and responsibilities related to his job as spelled out in the management system documentation, policies, procedures, local documentation, Management System Manual, Safety Manual and other related documents.
• Work as a team and achieve the team objectives to accomplish the Department, Group and COMPANY objectives. Support and contribute to the COMPANY Vision.

MINIMUM REQUIREMENTS :
1. Completion of Higher Secondary (12 years) education.
2. 5 years of experience in administrative jobs, out of which 3 years in preparation of tender scope of work, contracts and contract administration and cost controlling including knowledge of contractual principles and practices, and legal and commercial systems and standards.
3. The candidate should be fluent in written and spoken English. Should be able to handle day to day correspondence independently.
4. Good working knowledge of computer system and software such as SAP, MS word, MS Excel, etc.

19. ALUMINUM WELDER

Job Descriptions :
• Carries out a variety of high pressure and aluminum welding work mainly in the fabrications workshop and on site using electric arc, oxygen and acetylene equipment, and metal inert gas or tungsten inert gas.
• Receives verbal instructions, work orders sketches and drawings from
• Workshop foreman and arranges for necessary equipment, tools and materials, consumables, materials and any special tools to carry out the work. Ensures welding work permits are available prior to starting a job.
• Reads drawings, sketches or symbols, marks or makes free-hand layout on metal and prepares metal surface for welding. Selects the correct type and gauge welding rods for specific welds in specific types of materials, such as carbon steel, ferritic, austenite and stainless steel.
• Operates electric and welding machines, and adjusts ampere and voltage during welding. Operates oxygen/acetylene welding equipment, connects regulators, torch and gas cylinders, adjusts gas pressure.
• Welds, cuts and brazes metal and metal parts. Works with ferrous and non- ferrous metals, such as brass, bronze, cast iron, stainless steel and aluminum. Performs flat, vertical and overhead welding, as well as pipeline welding for gas, oil, steam and water lines.
• Operates metal inert gas or tungsten inert gas welding equipment and weld materials, such as heat resistant steel and copper-nickel alloys.
• Uses disc grinders to back-cut welds and drying oven for electrodes, and applies pre and post heat treatment techniques. Also applies correct tacking sequence of large diameter welds to prevent distortion.
• Maintains good housekeeping at all work locations and ensuring compliance with Safety and Fire regulations by wearing protective clothing, footwear, masks, goggles, and gloves and obtaining appropriate work permits before commencing field work.
• Responsible for the support of COMPANY Safety, environment and Quality policies and programs, and carrying out specific duties and responsibilities related to his job as spelled out in Management system documentation policies, procedures, local documentation, Management System Manual, Safety Manual and other related documents.

20. MECHANICAL SUPERVISOR

Job Descriptions:
• To supervise the installation, maintenance, repair and testing of a wide range of mechanical stationary and rotating equipment for the assigned area or facilities in Ras Laffan plant.
• Supervises the daily maintenance activities according to plans, work request priorities, and resource and material availabilities. Manages the planned completion times for each job.
• Ensures efficient and cost-effective completion of maintenance and repair jobs for rotating, stationary and mechanical machineries and equipment of the assigned area/facilities.
• Receives daily maintenance and repair work schedule, allocates work to subordinates, checks progress, and ensures that all mechanical checks and tests are carried out prior to hand over to operations.
• Supports workshop technicians in the execution of theirs jobs.
• Interprets technical drawings, isometrics and sketches for work and provides guidance and instructions.
• Updates SAP with actual man-hours for each work request executed by the workshop.
• Inspects completed works to ensure QA/QC and conformity with work request.
• Reviews raw materials store’s stock levels to ensure that stocks are maintained at adequate levels for current and future work programs.
• Adopts “Reverse Engineering Method” in case the spares are not available in the store.
• Manages the operation of Tool Store ensuring that consumables are regularly reordered and refurbished and damaged tools are replaced promptly.
• Ensures compliance with maintenance and engineering work method and procedures. Ensure systematic update of SAP/CMMS systems.
• Carries out regular technical inspections to verify all mechanical maintenance, installation or modification work are completed according to specifications and in compliance with QHSE standards.
• Identifies and recommends requirements for specialized contractor work.
o Supervises contractor activities on site to ensure compliance with their contractual obligations and QHSE standards.
• Takes Health, Safety & Environmental (HSE) lead in ensuring "safe systems of work" and "safe conditions" are in place within area of responsibility.
• Demonstrates visible commitment to HSE by periodically leading/taking part in risk assessments, audits, HSE meetings, emergency drills, etc.
• Ensures assigned staff complies with all company HSE policies & procedures and related initiatives.
• Participates in on-the-job training of assigned Qatari developers, monitors their progress and makes recommendations on how to support their learning and progression.
• Monitors and manages Workshop Technicians performance. Participates in annual performance appraisal of staff.
• Performs other similar or related duties as assigned.

MINIMUM REQUIREMENTS :
1. Secondary school Education (11-12 yrs.) plus minimum of two year full time training in Mechanical trade leading to a recognized Diploma.
2. Minimum of 10 years’ experience in Mechanical Maintenance in Oil & Gas plant or petrochemical industries
3. Minimum of 3 years’ experience at supervisory level in installation, Maintenance and repair of rotating and stationary equipment in gas or petrochemical production plant.

How To Apply

• Indicate your position that you wanted to apply in the email subject. Example : Shift Supervisor
• Create a Cover Letter that explains a brief of summary why should we hire you technically (important)
• Attach your picture in the first page of your CV (mandatory)
• Latest Educational qualification certificate (mandatory)
• Experience Letter (preferred)
• All above documents prepared in one file
• Please kindly submit the applications to following email
👉mgg@megarainfield.com
• Find the details on
👉www.megarainfield.com

Only shortlisted candidate will be contacted by our recruitment team.

An oil an gas service in Qatar; 10 positions; 2 of 4 ads

Related Post