Madina Group Part II ~ Oilfield Recruitment

Madina Group, with its core focus has been on the services related to the Oil, Gas, Petrochemicals, Power and related industries with emphasis on Mechanical is recruiting for the following positions :

1. MECHANICAL SUPERVISOR

Job Descriptions :
• To supervise the installation, maintenance, repair and testing of a wide range of mechanical stationary and rotating equipment for the assigned area or facilities in Ras Laffan plant.
• Supervises the daily maintenance activities according to plans, work request priorities, and resource and material availabilities. Manages the planned completion times for each job.
• Ensures efficient and cost-effective completion of maintenance and repair jobs for rotating, stationary and mechanical machineries and equipment of the assigned area/facilities.
• Receives daily maintenance and repair work schedule, allocates work to subordinates, checks progress, and ensures that all mechanical checks and tests are carried out prior to hand over to operations.
• Supports workshop technicians in the execution of their jobs.
• Interprets technical drawings, isometrics and sketches for work and provides guidance and instructions.
• Updates SAP with actual man-hours for each work request executed by the workshop.
• Inspects completed works to ensure QA/QC and conformity with work request.
• Reviews raw materials store’s stock levels to ensure that stocks are maintained at adequate levels for current and future work programs.
• Adopts “Reverse Engineering Method” in case the spares are not available in the store.
• Manages the operation of Tool Store ensuring that consumables are regularly reordered and refurbished and damaged tools are replaced promptly.
• Ensures compliance with maintenance and engineering work method and procedures. Ensure systematic update of SAP/CMMS systems.
• Carries out regular technical inspections to verify all mechanical maintenance, installation or modification work are completed according to specifications and in compliance with QHSE standards.
• Identifies and recommends requirements for specialized contractor work.
• Supervises contractor activities on site to ensure compliance with their contractual obligations and QHSE standards.
• Takes Health, Safety & Environmental (HSE) lead in ensuring "safe systems of work" and "safe conditions" are in place within area of responsibility.
• Demonstrates visible commitment to HSE by periodically leading/taking part in risk assessments, audits, HSE meetings, emergency drills, etc.
• Ensures assigned staff complies with all company HSE policies & procedures and related initiatives.
• Participates in on-the-job training of assigned Qatari developers, monitors their progress and makes recommendations on how to support their learning and progression.
• Monitors and manages Workshop Technicians performance. Participates in annual performance appraisal of staff.
• Performs other similar or related duties as assigned.

Minimum Requirements :
1. Secondary school Education (11-12 yrs.) plus minimum of two year full time training in Mechanical trade leading to a recognized Diploma.
2. Minimum of 10 years’ experience in Mechanical Maintenance in Oil & Gas plant or petrochemical industries
3. Minimum of 3 years’ experience at supervisory level in installation, Maintenance and repair of rotating and stationary equipment in gas or petrochemical production plant.

• Package and benefits :
- Salary ; QAR 4,500 – QAR 5,500 (Take Home Pay);
- Overtime
- Status ; Permanent & Single;
- Accommodation & Meal provided by the company;
- Annual leave 30 calendar days (Round trip tickets provided by the company)
- Offering great career opportunity with the large clients such as : Qatar Gas, Ras Gas, Qatar Petroleum, QAFCO, Q-CHEM, QAPCO, etc.

2. SENIOR MECHANICAL TECHNICIAN

Job Descriptions :
• Directs and carries out mechanical maintenance in their respective assigned Process or Offsites areas. Includes maintenance of various types of static and rotating equipment such as gas turbines, compressors, alternators, pumps, fans, boilers, vessels, columns, heat exchangers, LNG storage tanks, loading arms, flares, filters and valves. Includes regular monitoring, disassembly, repair and reassemble of equipment, as well as implementation of modifications.

Minimum Requirements :
1. Secondary (12 years) education. followed by 2 years formal course in mechanical.
2. 8 years hands on experience related to mechanical maintenance and repair of equipment’s & machineries used within the Oil and Gas or Petrochemical industry.

Package and benefits :
- Salary ; QAR 3,000 – QAR 3,600 (Take Home Pay);
- Overtime
- Status; Permanent & Single;
- Accommodation & Meal provided by the company;
- Annual leave 30 calendar days (Round trip tickets provided by the company);
- Offering great career opportunity with the large clients such as : Qatar Gas, Ras Gas, Qatar Petroleum, QAFCO, Q-CHEM, QAPCO, etc.

3. MECHANICAL TECHNICIAN

Job Description
• Carries out the skilled maintenance, overhaul and repair of plant and equipment in their respective assigned Process or Offsite areas.
• Includes regular monitoring, disassembly, repair and reassemble of equipment as well as implementation of modifications.
• Carries out the skilled maintenance on such items of Plant and equipment such as gas turbines, compressors, alternators, steam turbines, pumps, fans, boilers, vessels, columns, heat exchangers, LNG storage tanks, loading arms, flares, flares, filters, valves, etc.
• Uses a variety of tools and measuring devices, such as hammers, wrenches, Pneumatic tools, high pressure jetting and drilling equipment, grinders, calipers, feeler gauges, micrometers, Vernier’s, clock gauges, dial indicators, etc. Ensure that tools used are correctly calibrated. Must be able to work with very close tolerance.
• Ensures that materials and spare parts are available and are in good condition before starting maintenance activity.
• In accordance with permit to work system, carries out routine preventive Maintenance of machinery and static equipment according to schedules, check lists and specific equipment requirements. This includes changing oils, cleaning strainers, replacing filters, greasing and general overhaul of equipment. Repairs and or replaces defective parts, reassembles overhauls equipment.
• Carries out a wide range of corrective maintenance and repairs as a result of condition monitoring checks or failures of equipment. This includes the dismantling of various static & rotating equipment, repair, equipment reassembly and re-commissioning.
• Carries out other similar or related duties such as modifications, installation, pre-Commissioning and commissioning of new equipment, involvement in commissioning of new projects handled by Third Party.
• Makes routine checks to ascertain faults in Plant and machinery by feel, sight or sound and carries out minor repairs as necessary. Notify foreman of more serious malfunctions.

Minimum Requirements :
• Completed Secondary (12 years) Education followed by 2 years formal courses in Mechanical crafts.
• Minimum of 4 years mechanical crafts and maintenance experience in an oil & gas process plant / petro chemical industries.
• Fair knowledge of spoke & written English.

Package and benefits :
- Salary; QAR 2,200 – QAR 2,800 (Take Home Pay);
- Overtime;
- Status; Permanent & Single;
- Accommodation & Meal provided by the company;
- Annual leave 30 calendar days (Round trip tickets provided by the company);
- Offering great career opportunity with the large clients such as : Qatar Gas, Ras Gas, Qatar Petroleum, QAFCO, Q-CHEM, QAPCO, etc.

4. MECHANICAL VALVE TECHNICIAN (PSV/PRV)

Job Descriptions :
• Carries out the skilled maintenance, overhaul and repair of all types of valve, exchangers, Pressure testing of equipment in their respective assigned areas. Includes disassembly, repair, service and re-assemble of valves equipment as well as implementation of modifications.
• Carries out the skilled maintenance on such items of Plant and equipment as Ball Valve, Gate Valve, Globe Valve, Butterfly Valve, Plug Valve, Safety Relief Valve’s, Pilot operated Valve’s, Vacuum Valve’s, Pressure testing etc.
• Uses a variety of tools and measuring devices, such as hammers, wrenches, pneumatic tools, high pressure jetting and drilling equipment, grinders, calipers, feeler gauges, micrometers, Vernier’s, dial indicators, etc. In accordance with permit to work system. Ensures that tools used are correctly calibrated. Must be able to work to very close tolerance.
• Ensures that materials and spare parts are available and in good condition before starting maintenance activity.
• Carries out complete maintenance and servicing of PRV & ISOLATION Valves, according to schedules. This includes Lapping Technique, testing methods as per API standards, general overhaul of test equipment. Repairs and or replaces defective parts, reassembles overhauls equipment.
• Carries out wide range of corrective maintenance and repairs as a result of checks or failures of equipment. This includes the dismantling of various static and rotating equipment; repair the equipment reassembly and the re-commissioning.

Minimum Requirements :
1. Completed Secondary (12 years) Education followed by 2 years formal courses in mechanical crafts.
2. Minimum of 4 years of Valve Technician and maintenance experience in an oil or gas process plant / Petro Chemical Industries.
3. Fair working knowledge of English.

Package and benefits :
- Salary ; QAR 2,200 – QAR 2,500 (Take Home Pay);
- Overtime
- Status ; Permanent & Single;
- Accommodation & Meal provided by the company;
- Annual leave 30 calendar days (Round trip tickets provided by the company);
- Offering great career opportunity with the large clients such as : Qatar Gas, Ras Gas, Qatar Petroleum, QAFCO, Q-CHEM, QAPCO, etc.

5. MECHANICAL ASSISTANT

Job Descriptions :
• Assists Senior Mechanical Technician/ Contract Mechanical Technician in overhaul and repair of Plant and equipment in their respective assigned areas.
• Assist Senior Mechanical Technician and Mechanical Technician on such items of Plant and equipment as gas turbines, compressors, alternators, steam turbines, pumps, fans, boilers, vessels, columns, heat exchangers, LNG storage tanks, loading arms, flares, filters, valves, etc.
• Assists Senior Mechanical Technician and Mechanical Technician in use of variety of tools and devices, such as hammers, wrenches, pneumatic tools, high- pressure jetting and drilling equipment, grinders, calipers, etc.
• Assist Senior Mechanical Technician and Mechanical Technician in carrying out routine maintenance of machinery and static equipment according to schedules, check lists and specific equipment requirements. This includes changing oils, cleaning strainers, replacing filters, greasing and general overhaul of equipment.
• Assists Senior Mechanical Technician and Mechanical Technician in carrying out a wide range of equipment, this includes dismantling of various static and rotating equipment, the repair, the equipment reassembly and the decommissioning.

Minimum Requirements :
1. Completed Secondary (12 years) Education.
2. Minimum of 4 years of mechanical crafts and maintenance experience in an oil or gas process plant / Petrochemical Industries.
3. Fair working knowledge of English.

Package and benefits :
- Salary ; -
- Overtime
- Status ; Permanent & Single;
- Accommodation & Meal provided by the company;
- Annual leave 30 calendar days (Round trip tickets provided by the company);
- Offering great career opportunity with the large clients such as : Qatar Gas, Ras Gas, Qatar Petroleum, QAFCO, Q-CHEM, QAPCO, etc.

6. SENIOR ELECTRICAL TECHNICIAN

Job Descriptions :
• The job exists to provide efficient and quality maintenance of electrical equipment of Gas Distribution facilities. Responsible for ensuring that safe working procedure is strictly complied with, switches are properly isolated, ladders properly secured, warning notices posted etc. Ensures that subordinate technicians strictly follow QP’s safety procedures. Non-adherence to above working procedures will lead to unsafe plant conditions & failure of plant/equipment giving rise to substantial revenue losses.

Minimum Requirements :
1. Secondary education followed by two years formal training in electrical high voltage, medium voltage, low voltage switchgear, control protection relays or similar to ordinary national diploma level.
2. Short courses in safety and hazardous area.
3. 15 years minimum experience following formal training/apprenticeship in the installation, maintenance, repair and overhaul of a wide variety of low, medium and high voltage rotating, control and protection equipments.
4. To be fully conversant with standards pertaining to electrical equipment and plant installed in hazardous areas and to fully understand fault diagnosis and troubleshooting of sophisticated electrical logic and relay control systems.
5. A minimum of two years in a supervisory capacity would be necessary. Familiar with safety standards and regulations.
6. Fair written and spoken English. Knowledge and use of PCs using Excel, Word and Dbase programs.
7. Supervises, co-ordinates and participates in the activities of subordinate Technicians in the routine electrical maintenance, overhaul and breakdown repair of the 33 KV, 11KV, 3.3KV and 415V distribution network system, including all associated switchgear and control systems within Gas Distribution Stations. Equipment and plant include Emergency Diesel generators, Ex HT & LT motors, transformers, lighting systems, H.V. motors, fire water pumps, motor operated valve actuator system, Protective relays, UPS system & rectifier/Battery chargers, cathodic protection transformers/ systems etc.
8. Ensures the SAP generated preventative maintenance programs are implemented, as well as assisting in the development of improving ongoing and future preventative maintenance.

Package and benefits :
- Salary ; QAR 3,000 – QAR 3,500 (Take home pay);
- Overtime
- Status ; Permanent & Single;
- Accommodation & Meal provided by the company;
- Annual leave 30 calendar days (Round trip tickets provided by the company);
- Offering great career opportunity with the large clients such as : Qatar Gas, Ras Gas, Qatar Petroleum, QAFCO, Q-CHEM, QAPCO, etc.

7. ELECTRICAL TECHNICIAN

PROCESS – ET
• Carries out electrical preventive maintenance and troubleshooting under the supervision of process electrical foreman (this includes works on LV and HV motors, contactors and circuit breakers, control stations, LV and HV switchboards and associated power and control wiring and cables and earthling circuits.
• Works in accordance with procedures, policies and technical standards.
• Is responsible for common tools condition.
• Is responsible for safe work conditions for himself and personnel who work with him.
• Prepares drafts reports on work performed (difficulties encountered, time spent, materials used, etc.) in connection with work orders and / or interventions.
• Implements modifications, improvements to existing installations.
• Participates in pre-commissioning/commissioning of assigned area.
• Assists in assigned area start-up.
• Assists in training of newly recruited personnel.

WORKSHOP – ET
• Carries out Workshop Electrical activities in connection with Process and Off-sites maintenance needs (includes maintenance of LV motors, HV and LV contactors, circuit breakers, push button stations, socket outlets and light fittings, portable/mobile equipment etc.).
• Works in full accordance with procedures, policies and technical standards.
• Is responsible for common tools condition.
• Is responsible for safe work conditions for himself and personnel who work with him.
• Prepares drafts reports on work performed (difficulties encountered, time spent, materials used, etc.) in connection with work orders and / or interventions.
• Participates in the implementation modifications.
• Assists in Plant commissioning and start-up.
• Assists in training of newly recruited personnel.

Minimum Requirements :
1. Completion of Secondary (12 Years) Education following by 2 years formal course in electrical crafts.
2. 5 years electrical craft and maintenance experience in an Oil & Gas Processing
3. Plant / Petro chemical industries (that is ideally, not mandatory).
4. Fair knowledge of spoken and written English.
5. Good interpersonal skill to work in a diverse international environment.

8. SENIOR INSTRUMENT TECHNICIAN

Job Descriptions :
• Directs the work of other technicians and liaises with productions operations personnel.
• Participates and directs other technicians in carrying out the duties required for effective maintenace of field instruments including routine inspection, testing, calibration, repair and maintenance, commisssioning of DCS control system and loops, detailed troubleshooting and maintenance of instrument related to gas turbines, turbines control systems, vibration and temperature monitoring and protection systems, anti-surge control system, ESD and fire and gas control system, HMI and PLC.
• Direct other technicians in carrying out daily activities in computerized maintenance management system/SAP.
• Coordinate to carry out jobs as per ISO QMS procedures and maintains documentation.
• Act as a coach to the TPP trainees.

Minimum Requirements :
1. Completion of secondary education (12 years) followed by 2 years ful time training in instrument maintenance, electronic and microprocessor equipments.
2. 9 years experience in the maintenance and repair of wide range of instrumentation, electronic, pneumatic, PLC, gas turbine and gas compression control and protection system, fire and gas system.
3. Good knowledge of spoken and written English.
4. Should have good knowledge of safety practices relating to the oil/petrochemical industry.

Package and benefits :
- Salary ; QAR 3,200 – QAR 3,750 (Take Home Pay)
- Overtime
- Status ; Permanent & Single;
- Accommodation & Meal provided by the company;
- Annual leave 30 calendar days (Round trip tickets provided by the company);
- Offering great career opportunity with the large clients such as : Qatar Gas, Ras Gas, Qatar Petroleum, QAFCO, Q-CHEM, QAPCO, etc.

9. INSTRUMENT TECHNICIAN

Job Description :
• Carries out installation, calibration, minor troubleshooting and general maintenance of instrumentation and Control System associated with Process or Off-sites operation, deployed at the COMPANY facilities.
• Maintains all Instrument and Control Systems at a high degree of operational availability.
• Under the direction of the Instrument Foreman or Senior Instrument Technicians, receives Work Orders, Preventive Maintenance Routines, Safety Permits and appropriate engineering drawings and carries-out assignments.
• Under the direction of the Instrument Foremen or Senior Instrument Technicians, carries out in a safe manner, field troubleshooting, calibration and replacement of Instrument devices.
• Assists Senior Instrument Technicians in pre-commissioning, commissioning and start-up activities.
• Assists Senior Instrument Technicians in minor instrumentation modifications.
• Actively assists Senior Instrument Technicians in shutdown work.
• Ensures that all work is carried-out in accordance of safe working procedures, safety permits and regulations.

WORKSHOP – IT
• Carries out overhauling/servicing of control valves, transmitters and other field instruments and cabling/tubing requirements. General Maintenance of calibration equipment in the Instrument Workshop.
• Maintains all Workshop Equipment at a high degree of operational availability
• Under the direction of the Workshop Foreman or Senior Instrument Workshop Technicians, receives Work Orders, Preventive Maintenance Routines, Safety Permits and appropriate engineering drawings and carries-out assignments.
• Under the direction of the Workshop Foremen or Senior Instrument Workshop Technicians, carries out in a safe manner, calibration/overhauling/servicing and replacement of Instrument devices.
• Assists Senior Instrument Workshop Technicians in pre-commissioning,commissioning and start-up activities.
• Assists Senior Instrument Workshop Technicians in minor instrumentation modifications.
• Actively assists Senior Instrument Workshop Technicians in shutdown work.
• Ensures that all work is carried-out in accordance of safe working procedures, safety permits and regulations.

Minimum Requirements:
1. Completed Secondary High School Education and have acquired formal technical training in Instrumentation or Electrical Trade from a recognize apprenticeship, or equivalent.
2. Minimum of 5 years of experience in the maintenance, overhauling, servicing and troubleshooting of a variety of Instrumentation and Control Systems, in the Oil, Gas or Petrochemical Industries.
3. Familiar with the fundamentals of Programmable Logic Controllers (PLC), Safety shutdown Systems.
4. Fluent in English language (primarily in “Spoken English” to reasonable degree in “Written English”).
5. Ability to read P Θ ID’s and be familiar with Ladder Logic Schematics.

Package and benefits :
- Salary: QAR 2,600 – QAR 3,200 (Take Home Pay);
- Overtime;
- Status; Permanent & Single;
- Accommodation & Meal provided by the company;
- Annual leave 30 calendar days (Round trip tickets provided by the company);
- Offering great career opportunity with the large clients such as : Qatar Gas, Ras Gas, Qatar Petroleum, QAFCO, Q-CHEM, QAPCO, etc.

10. FABRICATION SUPERVISOR

Job Descriptions :
• Priorities and implement schedules relating to planned fabrication, installation and repair activities for a team within an allocated time.
o Supervise and support assigned team in achieving to complete the task safe and efficient manner.
• Contribute, in anticipation of need, to effective emergency procedures and the allocation of resources.
o Act as a source of technical expertise within allocated team in order to troubleshoot major and complex problems.
• Monitor inventory levels and performance and quality of spare parts and consumables.
o Generate daily activity reports and database information for in order to monitor and track work progress, identify trends and maintain comprehensive service histories of all plant and equipment.
o Ensure the implementation of, and adherence to, approved health, safety, environmental and quality procedures and systems that protect staff and assets.
• Responsible to conduct toolbox talk, in implementation the PTW system.

Minimum Requirements :
1. Completion of HND in Engineering followed by 3 years formal trade training, plus a
2. Minimum of 7 years direct maintenance experience in the oil and gas sector.

Package and benefits :
- Salary ; QAR 4,000 – QAR 5,000 (Take home pay)
- Overtime
- Status ; Permanent & Single;
- Accommodation & Meal provided by the company;
- Annual leave 30 calendar days (Round trip tickets provided by the company);
- Offering great career opportunity with the large clients such as : Qatar Gas, Ras Gas, Qatar Petroleum, QAFCO, Q-CHEM, QAPCO, etc.

How To Apply
• Indicate your position that you wanted to apply in the email subject. Example: Shift Supervisor
• Create a Cover Letter that explains a brief of summary why should we hire you technically (important)
• Attach your picture in the first page of your CV (mandatory)
• Latest Educational qualification certificate (mandatory)
• Experience Letter (preferred)
• All above documents prepared in one file
• Please kindly submit the applications to following email

👉 mgg@megarainfield.com

• Find the details on www.megarainfield.com

Only shortlisted candidate will be contacted by our recruitment team.

Madina Group Part II

Related Post